Insulation does not cause damp on its own, but in the wrong house or done badly it can. Here is how to find out which problem you actually have.
You paid for cavity wall insulation to make the house warmer, and now there is a damp patch on an outside wall. That is more common than it should be, and it has two quite different causes: rain crossing the filled cavity into the inner wall, or a home that has become more airtight without any extra ventilation. The fix for one is useless for the other.
Damp that follows rain and appears on outside-facing walls suggests water crossing the cavity, which needs an inspection and probably a guarantee claim. Mould in corners and on cold surfaces with no link to rain suggests condensation in a more airtight home, which needs ventilation and moisture control. A dehumidifier cannot stop rain crossing a cavity.
Dover’s older terraces in the Dour valley are generally solid-walled and have no cavity to fill. Cavity walls are the norm in the later housing on higher ground and in the villages inland. The ones to look at more carefully are the exposed ones: clifftop and coastal edges such as Kingsdown and St Margaret’s Bay, where wind-driven rain hits the wall hardest. Advisers such as the Centre for Sustainable Energy say exposure should be assessed before a cavity is filled, because insulation in a cavity facing driving rain can carry moisture across to the inner wall.
Work down the rungs in order. Most problems are solved on rungs 1 to 3, and each rung says plainly when the next one is not needed.
Clear gutters and downpipes so water is not running down the wall, repair obvious cracks in render and pointing, and make sure air bricks are not blocked by the insulation or by stored items. Then deal with moisture in the house: run extractor fans, dry washing in a ventilated room and keep low background heating on, as GOV.UK guidance recommends, because warm air holds more moisture and condensation forms less readily.
If the damp follows rain, contact the installer or the guarantee body and ask for an inspection under the guarantee. If you want an independent view, a surveyor with damp and building pathology experience can inspect the cavity and the wall condition. Where insulation is bridging the cavity in an exposed location, partial or full extraction may be recommended. That is a major job, so get the diagnosis in writing before agreeing to it.
If the inspection shows no water crossing the cavity and your problem is condensation, the answer is controlling moisture and ventilation. A loft-mounted dehumidifier such as the Dryzen system extracts up to 12 litres a day per unit and covers up to 150 m2 per unit, with an adjustable ratio of fresh and recycled air that is dehumidified and filtered. It suits owner-occupied homes with a loft. It is not the answer to rain crossing a cavity, and it is not suitable for rental homes unless the landlord authorises the work.
It can where the cavity is bridged, the walls are in poor condition or the property is very exposed to driving rain. In well-suited, well-maintained homes it normally does not.
Most installations come with a guarantee, and many are backed by CIGA for 25 years. Check your installation certificate for the guarantee details and the installer.
Only if the cause is condensation. If water is crossing the cavity, the fix is repair or extraction, not drying the air.
Book a free survey and we will tell you honestly whether your damp is the kind a Dryzen system helps with, or whether you need a roofer, a gutter repair or a damp specialist first.
Book a Free SurveySources: Centre for Sustainable Energy, cavity wall insulation advice; CIGA (Cavity Insulation Guarantee Agency); GOV.UK, Understanding and addressing the health risks of damp and mould in the home; Property Care Association, penetrating damp advice. This guide is general information, not a survey of your home.