Mould in the same corner every winter is rarely random. Here is how to find the cold spot behind it, and what to try before spending any money.
If mould keeps coming back in the same corner, behind the same wardrobe or above the same window, the cause is usually a cold spot: a patch of wall, ceiling or window reveal that sits colder than the surfaces around it. Warm, moist indoor air touches that cold patch, turns to water and feeds mould. Finding the spot is half the job.
Cold spots show up as damp or mould on outside walls, in corners and behind furniture, mostly in winter. Start with free checks: map where the patches are, pull furniture off the wall and cut the moisture you add to the air. If a spot stays cold after that, the cause may be a gap in insulation, which a tradesperson needs to look at. A dehumidifier helps only with the moisture side.
The Property Care Association notes that condensation is more apparent in winter because outside air is colder and external walls and windows are cold. GOV.UK guidance adds that homes which are insufficiently insulated and heated are more prone to moisture and condensation on the inside of external walls and windows, and that cold spots can occur where there are gaps in insulation. Whether you live in an older solid-walled house or a newer one with patchy insulation in Dover or East Kent, the pattern is the same: wherever a surface stays cold, that is where the moisture lands. Our Walmer page has a checklist by age of home.
Work down the rungs in order. Most cold-spot problems are improved on rungs 1 and 2, and each rung says plainly when the next is not needed.
Photograph each patch with the date, so you can see whether it is shrinking or growing.
Leave a gap between furniture and external walls. GOV.UK advises this because air needs to move across the surface. Heat the home evenly rather than in short bursts, because a warmer wall collects less condensation.
Clean off mould that is already there. GOV.UK says mould can be removed from hard surfaces with an appropriate cleaning product and should then be left to dry completely.
If a spot is still cold and damp after rungs 1 and 2, the wall may have a gap in its insulation, or the cause may not be condensation at all. An insulation installer or surveyor can check for gaps. For a persistent problem the PCA recommends asking a specialist surveyor to explore the cause. Do not paint over the patch or hide it behind new boards before the cause is known.
If the structure is sound and the patches are condensation, lowering the moisture in the air means less of it condenses on the cold surfaces. A loft-mounted dehumidifier such as the Dryzen system covers up to 150 m2 per unit and extracts up to 12 litres a day. It aims for about 50-55% humidity, which helps stop the conditions mould and dust mites need. It does not warm a wall, and it does not remove mould that is already growing, so clean that off first.
It needs a loft to mount the unit and suits owner-occupied homes; it is not suitable for rental properties unless the landlord authorises the changes. If the cause is a leak or an insulation gap, fix that first.
Look at where it sits and when it appears. Condensation-type patches usually show on outside walls, in corners, above windows and behind furniture, mostly in winter. GOV.UK guidance lists moisture behind sofas and wardrobes as a sign of condensation damp. A patch that appears after rain, or has a tide-mark, points to a leak instead.
Yes, it is the cheapest fix there is. GOV.UK advises leaving a gap between furniture and external walls so air can move, which stops the wall behind a wardrobe or sofa staying cold and damp.
It cannot warm the wall, but it can lower the moisture in the air so less of it condenses on cold surfaces. If the cold spot comes from a gap in insulation, or a leak is involved, that needs fixing first.
Book a free survey and we will tell you honestly whether your damp is the kind a Dryzen system helps with, or whether you need an insulation check or a damp specialist first.
Book a Free SurveySources: Property Care Association, condensation advice; GOV.UK, Understanding and addressing the health risks of damp and mould in the home. This guide is general information, not a survey of your home.