You have just moved into a new home that was meant to be warm, dry and trouble-free, and the windows are streaming and a bedroom corner is spotting with mould. It is a common and frustrating start. A new house is tightly built, and for the first months it is also still drying out, so moisture has two sources and few ways out.

Quick answer

New homes hold moisture from two places: the building materials themselves, which are still drying out, and the household. The NHBC guide to a new home says this condensation gradually reduces as the building dries, but you must manage it meanwhile. Use extractor fans, keep trickle vents open, heat evenly rather than hard, and report persistent mould to your builder in writing.

Why Dover district new builds feel it first

Dover district has taken a lot of new housing. Wikipedia records a development of 1,200 new homes that began in 2014 at Aylesham, and a long-running programme of building on greenfield sites around Whitfield, now part of Dover's urban area. Homes like these are built to hold heat, which suits energy bills, but the same airtightness means moisture from cooking, showers, washing and breathing has fewer ways to escape in that first year. Our Aylesham and Whitfield pages cover the local picture.

The ladder: cheapest check first

Work down the rungs in order. Most first-winter problems are solved on rungs 1 and 2.

  1. Rung 1: free checks

    Use the ventilation the house already has

    • Extractor fans and cooker hood. The UK Centre for Moisture in Buildings guide, supported by the NHBC Foundation, says to run them whenever steam is produced: cooking, bathing, washing and drying clothes.
    • Trickle vents. Keep them open to reduce condensation and wipe away any water that forms on windows.
    • Fresh air. Open windows when it is safe to let steamy air out, and cover pans when cooking.
    • Clear the air paths. Do not pack furniture against outside walls or fill wardrobes so tightly that air cannot move.
  2. Rung 2: small fixes

    Heat evenly and be patient

    The NHBC guide says materials dry out gradually and that heat accelerates shrinkage, so keep an even temperature through the home and avoid turning the heating to its highest setting if you move in during winter. If your home has a mechanical ventilation system, read its manual and keep it running as the manufacturer advises.

    Dry washing in a ventilated room, or outside when you can, not on radiators in a closed bedroom. Add a cheap hygrometer so you can see how humid the house runs from day to day.

  3. Rung 3: call a tradesperson

    Tell the builder, in writing

    The NHBC guide says small cracks in walls and gaps in joinery are common signs of shrinkage and can usually be filled at routine redecoration. Persistent marks or mould that return after cleaning should go to your builder or warranty provider. Photograph the problem with dates and keep a record, and check how long your defect period lasts. Use a competent fan engineer if an extractor is weak or vents into the loft instead of outside.

  4. Rung 4: a system-level fix

    Where a dehumidifier does and does not fit

    If you have worked through rungs 1 to 3, the house is no longer drying out and the readings still stay high, a loft-mounted dehumidifier is one option. A Dryzen unit covers up to 150 m2 and extracts up to 12 litres a day, with an activated carbon filter and a target of about 50 to 55 percent humidity, adjustable from 40 to 70. It needs a loft, it is designed for owner-occupied homes and it is not suitable for rental properties unless the landlord authorises the changes. It will not fix a leak, and it is not a substitute for the first winter's ventilation habits.

Stop and get someone in if

  • Water dripping from a ceiling, around a window or from a pipe: it is a leak, not condensation.
  • Cracks wider than a hairline, or cracks that keep growing: report them to your builder promptly.
  • Large areas of mould, or anyone in the home with breathing problems or a weakened immune system: get professional advice before cleaning.

Common questions

Is it normal for a brand-new home to have condensation?

Yes. The NHBC guide to a new home explains that moisture evaporating from the building materials is quite common in new homes, and that condensation gradually reduces as the building dries out. It still needs managing, or mould can appear on walls and ceilings.

Should I turn the heating up to dry the house out faster?

No. The NHBC guide says shrinkage is accelerated by heat, so be sparing with it, keep an even temperature and do not turn the central heating up to its highest setting in the first winter. Steady, moderate heat is the advice.

What should I do about cracks and mould in a new build?

Small hairline cracks and gaps in joinery are common shrinkage as materials dry. Mould and persistent marks are different: report them to your builder or warranty provider in writing, with dated photographs, and clean surface mould from hard surfaces with a suitable product.

Is a dehumidifier the answer for a new home?

Not in the first months. Fix ventilation and habits first and let the building dry out. If humidity then stays high in an owner-occupied home with a loft, a loft-mounted system is one option, and it is not suitable for rentals unless the landlord authorises the changes.

Not sure which rung you are on?

Book a free survey and we will tell you honestly whether your damp is the kind a Dryzen system helps with, or whether you need your builder, a fan engineer or another trade first.

Book a Free Survey

Related guides

Where we cover

Sources: NHBC, Guide to your new home (2024); NHBC, New guide offers top tips to prevent moisture in new-build homes; Aylesham, Wikipedia; Whitfield, Kent, Wikipedia. This guide is general information, not a survey of your home.

Ready to Solve Your Home's Damp Problem?

Book your free, no-obligation survey today. Our specialist will assess your home and give you an honest recommendation.

Book Your Free Survey